 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Luminosity white Color LED 61-25UWC/S400-A6/TR8 Features Super luminosity white LED. White SMT package. Built in 5 LED chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: Reflow soldering. High performance. Pb-free. Descriptions Due to the package design, 61-25 has wide viewing angle, low power consumption and high luminous intensity. This feature makes it ideal for light pipe or lighting application. Applications Amusement equipment. Information boards. Flashlight for digital camera of cellular phone. Lighting for small size device. Device Selection Guide Chip Lens Color Material InGaN Emitted Color White Water Clear Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 1 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 61-25UWC/S400-A6/TR8 Package Outline Dimensions Notes: 1.All dimensions are in millimeters. 2.Tolerances unspecified are 0.1mm. Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 2 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 61-25UWC/S400-A6/TR8 Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation *Forward Current *Peak Forward Current(Duty 1/10 @ 1KHZ) *. Maximum forward current for each die. Symbol VR Topr Tstg Tsol ESD Pd IF IFP Rating 5 -40 ~ +85 -40~ +100 260 (for 5 second) 150 110 25 100 Unit V V mW mA mA Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity*1 Viewing Angle*2 Forward Voltage*2 Reverse Current Symbol Iv 21/2 VF IR Min. 1500 ------------- Typ. 2000 120 3.5 ----- Max. --------4.0 50 Unit mcd deg V A Condition IF=20mA IF=20mA IF=20mA VR=5V *1 When five LED dies are operated simultaneously. *2 For each die. The products are sensitive to static electricity and care must be fully taken when handling products. Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 3 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 61-25UWC/S400-A6/TR8 Color Ranks x y 0.280 0.248 Rank a0 0.264 0.283 0.267 0.305 0.296 0.276 x y 0.296 0.276 Rank b2 0.287 0.330 0.295 0.339 0.330 0.318 x y 0.287 0.295 Rank b1 0.283 0.330 0.305 0.360 0.330 0.339 x y 0.330 0.318 Rank c0 0.330 0.361 0.360 0.385 0.356 0.351 *The C.I.E. 1931 color rank ( Tolerance 0.01). CIE Chromaticity Diagram Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 4 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 61-25UWC/S400-A6/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 5 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 61-25UWC/S400-A6/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Bin IV Bin X-Y Bin VF Reel Dimensions Taping Quantity: 800pcs Note: The tolerances unless mentioned is 0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 6 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 61-25UWC/S400-A6/TR8 Carrier Tape Dimensions Note: The tolerances unless mentioned is 0.1mm, Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 7 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 61-25UWC/S400-A6/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 8 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 61-25UWC/S400-A6/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 9 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 61-25UWC/S400-A6/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.: DSE-615-002 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.1 Page: 10 of 10 Prepared by: Bennett |
Price & Availability of 61-25UWCS400-A6TR8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |